TMT Bars

Product Details:

TMT bars or Thermo-Mechanically Treated bars are high-strength reinforcement bars having a tough outer core and a soft inner core. The very first step of the manufacturing process involves passing the steel wires through a rolling mill stand

Product Details:

Vizag TMT Bars possess high strength as well as excellent ductility.The tough outer and ductile core of the Vizag TMT Bars, result in excellent bend ability

Product Details:

TMT bar is harder on the outside and is softer on the inside which results in good welding. When steel is compounded by cement, it ensures gain strength to the building. TMT bar has a heating capacity up to 500° C. Controls soil erosion and earthquake resistant.

Product Details:

JSW NeosteelCRS. High strength corrosion resistant TMT re-bars. Typically used in construction in coastal areas, areas with high salinity in the air, industrial areas, construction of marine structures and in areas with high acid content in the air.

Product Details:

Here comes the complete reform with the Super Ductile Tata Tiscon 550SD! It is the newest and most formidable force to build a future perfect construction. A testament to the unmatched trust of Tata Steel, it is India’s first GreenPro certified rebar and is manufactured using industry
leading innovative automation. Made from virgin iron ore and pure steel, every rebar has more load carrying capacity because of its supreme strength and ductility. Not to mention its enhanced earthquake resistant properties.
Why wait? Lay an unshakable foundation
of your dreams with Tata Tiscon 550SD!

More Strength
More Strength = More Savings

More load carrying capacity of the rebars. For a given design load, fewer number of rebars or reduced diameter is required.

Minimum YS of 570*MPa

(More than IS1786:2008 – 550MPa)

• Easily carries design load without any structural cracks
• Optimised design leads to reduce steel consumption
• Up to 6%^ savings on steel quantity

* Typical value as obtained in 95% of the cases ^ Savings % based on study done for 500 and 550 grade rebar for typical RCC frame (SMRF) configurations like G+1, G+2, G+3 and floor areas of 250 and 500 sq yard located in seismic zone IV

More Flexibility More Flexibility (ductility) = More Safety

Enhanced earthquake resistance

Minimum UTS/YS ratio of >=1.15

(Matching lS13920 2016 - >=1.15)

Higher gap between YS and UTS results in higher ductility

Minimum Total Elongation of >=16%

(More than IS1Z920:2016 - >=14.5%)

Ability to stretch more before fracture at room temperature

Minimum Total Elongation at max force (UTS) >=5%

(Matching 151786:2008 >=5%)

 

Delays localised necking of rebar at room temperature.In short, better margin of safety before failure of the material.

More Eco-friendly

India’s First GreenPro Certified Rebar

 

• Our sustainable manufacturing practices have reduced the environmental impact of our rebars
• GreenPro Ecolabel enables you to make an informed and sustainable choice

More Assurance

Ensures peace-of-mind while purchasing

• Tata Tiscon 550SD rebars are available in pieces of consistent dimensions
• Each piece is of accurate length, diameter and weight

Product Details:

Thermo Mechanically Treated (TMT) steel bars are known as the new generation steel owing to their high strengths obtained exclusively in this method of steelmaking. TMT steel is manufactured by heating raw material at 1200^0c initially, after which it is austenitized. Then, the bars undergo a process called quenching which allows rapid cooling and conversion into martensite, the high strength structure of steel.

 

During Thermo Mechanical Treatment, the steel bars are made to pass through a specially-designed water cooling system. The bars are cooled in water for a specific period of time such that the surface is colder than the inner core that remains hot. This makes the heat flow from the inner core to outer surface, causing tempering. This additional tempering of steel bars helps to impart a higher strength to the steel thus treated.

• Withstands bending and rebending due to low carbon content and higher elongation.

 

• Safe and economic due to bendability, weldability and excellent ductility.

 

• Retention of strength against fire hazards due to tempered martensite outer layer.

 

• Superior strength and anti-corrosive properties due to special TMT process.

 

• Earthquake-resistant due to soft ferrite-pearlite core which bears dynamic and seismic loading.

 

• Fine welding features that allow butt welding and lap welding.

 

• Superior bonding strength between bar and concrete due to external ribs.

Product Details:

ARS 550D TMT Bars are manufactured using high grade raw material, sourced domestically and internationally.

Features:

• 100% “D” quality TMT bars (Low Phosphorus and Low Sulphur)
• Upto Rs.6000 savings/ton, certified by SERC (Govt of India)
• Only TMT in south india to be tested and certified by international testing agency “SGS”

Why ARS 550D TMT Bars?

• Original & Certified manufacturer of 550D TMT bars
• Transparent Pricing & Strict Market operation Pricing Policies
• All size stock availability throughout the year
• Transparent organizational policies
• Territory Protection
• Engagement Programs & Dealer Events
• Loyalty Schemes

Product Details:

TMT bars or Thermo-Mechanically Treated bars are high-strength reinforcement bars having a tough outer core and a soft inner core. The very first step of the manufacturing process involves passing the steel wires through a rolling mill stand